Global Tankcom Sdn Bhd
公司办公地址：
Suite 2-7-5, No. 2, 7th Floor, Wisma Menjalara, Jalan 7A/62A, Bandar Menjalara, 52200 Kuala Lumpur, Malaysia.
分公司及仓库：
18, Jalan Biola 33/1, Seksyen 33, 40400 Shah Alam, Selangor, Malaysia.
+6012-390 6878
+60123906878
Biogas Holder
| 上一页 | 2 / 2 | 下一页 |
Biogass Holder
YHR Biogass Holder is a cutting edge solution for biogass storage, designed with three sophisticated components: the outer membrane, inner membrane, and bottom membrane. The inflated outer membrane provides a robust protective layer that maintains pressure stability even in the extreme weather conditions such as storms. The inner membrane handles biogass storage, automatically adjusting its expansion or contraction based on gas volume to ensure consistence internal pressure. The bottom membrane, laid over the foundation, seals the storage space completely between the inner membrane and the foundation.
Manufactured to DIN 4102 B1 standards, our membranes offer excellent flame resistance, antifungal and UV-resistant properties, and superior impermeability to CH4 gas. This innovative design not only ensures secure gas containment and environmental protection but also offers the lowest investment costs compared to other storage methods. The YHR Biogas Holder stands out as an economical and reliable choice for biogas projects, providing both long term cost savings and enhanced performance.
Specifications
Biogas Holder Capacity: 50-10000m3
Operating Pressure: 0.5 - 2kPa
Service Life: >10 years
Membrane Material: Biogas-specific membrane
Permeability Rate: <400cm3 / m2 x 24h x 0.1MPa
Outer Membrane Tensile Strength: >5000N/5cm (type III membrane or higher)
Inner Membrane Tensile Strength: >4000N/5cm (type II membrane or higher)
Welding Seam: HF70, HF80
H2S Corossion Resistance: 1000ppm
Fire Rating: >B1
Explosion-Proof Fan: D-class explosion-proof
Inner Membrane Folding Resistance: >100,000 times
Sunlight Fastness: Better than grade 7
Temperature Range: -30C to 70C
Surface: <109 ohm
Wind and Snow Load Resistance: Refer to load calculation
Advantages
Excellent Airtightness
The membrane roof uses advanced sealing technology and high-quality materials to effectively prevent gas leakage, ensuring safe storage of gas within the tank.
Convenient Maintenance
The design is simple and reasonable, making daily maintenance and inspection quick and easy, reducing maintenance time and costs, and improving efficiency.
Flexible Environment Adaptibility
The design is flexible and can be customised according to different usage requirements and environmental conditions, adapting to various complex working conditions and climates.
High Safety Standard
The design includes multiple safety measures to ensure safety under various operating conditions, avoiding potential dangers and accidents.
Strong Durability
Made with high-strength, wear-resistant membrane materials, it can be used long-term in harsh environments, extending its service life.
Intelligent Control
It can be integrated with advanced control systems to achieve intelligent management of gas storage and usagem enhancing operational convenience and safety.
YHR Biogass Holder is a cutting edge solution for biogass storage, designed with three sophisticated components: the outer membrane, inner membrane, and bottom membrane. The inflated outer membrane provides a robust protective layer that maintains pressure stability even in the extreme weather conditions such as storms. The inner membrane handles biogass storage, automatically adjusting its expansion or contraction based on gas volume to ensure consistence internal pressure. The bottom membrane, laid over the foundation, seals the storage space completely between the inner membrane and the foundation.
Manufactured to DIN 4102 B1 standards, our membranes offer excellent flame resistance, antifungal and UV-resistant properties, and superior impermeability to CH4 gas. This innovative design not only ensures secure gas containment and environmental protection but also offers the lowest investment costs compared to other storage methods. The YHR Biogas Holder stands out as an economical and reliable choice for biogas projects, providing both long term cost savings and enhanced performance.
Specifications
Biogas Holder Capacity: 50-10000m3
Operating Pressure: 0.5 - 2kPa
Service Life: >10 years
Membrane Material: Biogas-specific membrane
Permeability Rate: <400cm3 / m2 x 24h x 0.1MPa
Outer Membrane Tensile Strength: >5000N/5cm (type III membrane or higher)
Inner Membrane Tensile Strength: >4000N/5cm (type II membrane or higher)
Welding Seam: HF70, HF80
H2S Corossion Resistance: 1000ppm
Fire Rating: >B1
Explosion-Proof Fan: D-class explosion-proof
Inner Membrane Folding Resistance: >100,000 times
Sunlight Fastness: Better than grade 7
Temperature Range: -30C to 70C
Surface: <109 ohm
Wind and Snow Load Resistance: Refer to load calculation
Advantages
Excellent Airtightness
The membrane roof uses advanced sealing technology and high-quality materials to effectively prevent gas leakage, ensuring safe storage of gas within the tank.
Convenient Maintenance
The design is simple and reasonable, making daily maintenance and inspection quick and easy, reducing maintenance time and costs, and improving efficiency.
Flexible Environment Adaptibility
The design is flexible and can be customised according to different usage requirements and environmental conditions, adapting to various complex working conditions and climates.
High Safety Standard
The design includes multiple safety measures to ensure safety under various operating conditions, avoiding potential dangers and accidents.
Strong Durability
Made with high-strength, wear-resistant membrane materials, it can be used long-term in harsh environments, extending its service life.
Intelligent Control
It can be integrated with advanced control systems to achieve intelligent management of gas storage and usagem enhancing operational convenience and safety.